USB CDC/ECM Class Driver for Windows 2000, XP, Vista, 7
Features Supported Platforms Demo Documentation Prices
Thesycon’s USB CDC/ECM device driver provides a network adapter emulation on Windows operating systems by implementing the CDC/ECM protocol on USB.
The driver supports all Windows desktop operating versions (e.g. Windows 2000, Windows XP, Windows Vista and Windows 7). The driver works with devices that are compliant to the Communication Device Class (CDC) specification, subclass Ethernet Control Model (ECM).
USB CDC/ECM Class Driver Features
- NDIS Support. Exposes a network adapter interface according to the NDIS 5.0 model on Windows 2000 and NDIS 5.1 on Windows XP and above.
- Plug&Play. The driver fully supports plug and play.
- Power Management. The driver supports the Windows power management model. The network adapter is not stopped when the PC enters standby, sleep or hibernate. A device with Auto-IP address negotiation is not required to restart the negotiation after resume from a power down state.
- MAC Address. By default, the driver uses the MAC address reported by the device. If the device cannot provide a MAC address, the driver can use a MAC address defined in the INF file or generate one from a public pool.
- IP Address. The IP address of the adapter can be assigned via DHCP, Auto-IP, or manually.
- Multiple USB Interfaces. The USB CDC/ECM class driver can be used with devices that implement multiple USB interfaces. In this case a multi-interface driver is required. This driver splits the interfaces into separate device nodes. On each device node a separate driver stack can be installed. For information on Thesycon’s USB Multi-Interface Driver, check out http://www.thesycon.de/usbmultiinterface.
- WHQL Certification. The driver conforms to Microsoft's Windows Driver Model (WDM) and can be certified by Windows Hardware Quality Labs (WHQL) for all current 32-bit and 64-bit operating systems.
A similar driver is also available for Windows CE and Windows Mobile.
Easy Installation
Using Thesycon’s PnP Driver Installer it is very easy to create a specific setup wizard that handles driver installation, un-installation and update in a comfortable and reliable way. For more information on PnP Driver Installer, check out http://www.thesycon.de/pnpinstaller.
Free Demo
The demo version is time-limited but has full functionality. After the device is connected the driver can be used for 4 hours, then the driver disables itself and the computer must be rebooted in order to use the demo again. The demo package includes the driver and the documentation.
Current Version: 1.11
USB CDC/ECM Class Driver Demo Package
Documentation
Licensing conditions & Prices
USB CDC/ECM Software License Agreement 
USB Vendor and Product ID
When designing a USB device you need an official USB vendor ID (VID) which is unique world-wide. Vendor ID's will be assigned by the USB Implementers Forum (www.usb.org). There is a fee of $1500 US.
Thesycon owns a USB vendor ID and provides a subset of product ID's (PID) to customers who licensed our USB software.
Keep up to Date
If you would like to be kept informed of product updates, please subscribe to the Thesycon newsletter.
© 2010 THESYCON
